Innovas

Helios Automatic Condenser Tube Cleaning Systems

Clean Your Condenser Tubes Every 20 Minutes With ZERO Effort

The Innovas tube cleaning system is installed on the heat exchanger and keeps the tubes clean automatically, without time-consuming labor or any type of intervention.

Did you know? Even 0.6mm Build-Up Scale Reduces Chiller Efficiency by 20%

Shell and Tube heat exchanger fouling is a well-known phenomenon, but the true nature of fouling and its operational impacts are still underestimated.

Condenser tube fouling comes in four major forms and is found in up to 95% of operating shell and tube exchangers.

Some estimates place the cost of this unchecked fouling to the U.S. economy at over $70 billion.

This vast amount of waste occurs despite operators’ belief that manual cleaning heat exchangers once or twice a year the exchangers will mitigate the problem.

The health of your chiller is dependent on the health of its tubes.

Did you know? Even 0.6mm Build-Up Scale Reduces Chiller Efficiency by 20%

Shell and Tube heat exchanger fouling is a well-known phenomenon, but the true nature of fouling and its operational impacts are still underestimated.

Condenser tube fouling comes in four major forms and is found in up to 95% of operating shell and tube exchangers.

Some estimates place the cost of this unchecked fouling to the U.S. economy at over $70 billion.

This vast amount of waste occurs despite operators’ belief that manual cleaning heat exchangers once or twice a year the exchangers will mitigate the problem.

The health of your chiller is dependent on the health of its tubes.

Avoid Scale Buildup With Automatic Tube Cleaning 72x Per Day

Innovas automates tube cleaning on water cooled chillers using foam balls as cleaners.

Not only does this reduce/eliminates downtime, but it also solves many typical surge issues and makes chillers run better. Innova maintains a solid cleaning routine, cleaning the chiller every 20 minutes whenever the unit is active.

In fact, Innova can increase chiller capacity in 2 to 5% by cleaning the tubes 72 times a day.

And we all know that cleaner tubes improve heat transfer, and better heat transfer means lower motor amps on the compressor, protecting the component from overwork.

The simple cleaning method of Innova has proven to provide a huge improvement in chiller performance in hundreds of installs, especially on the hottest days with the highest loads, when you need the machine the most.

Avoid Scale Buildup With Automatic Tube Cleaning 72x Per Day

Innovas automates tube cleaning on water cooled chillers using foam balls as cleaners.

Not only does this reduce/eliminates downtime, but it also solves many typical surge issues and makes chillers run better. Innova maintains a solid cleaning routine, cleaning the chiller every 20 minutes whenever the unit is active.

In fact, Innova can increase chiller capacity in 2 to 5% by cleaning the tubes 72 times a day.

And we all know that cleaner tubes improve heat transfer, and better heat transfer means lower motor amps on the compressor, protecting the component from overwork.

The simple cleaning method of Innova has proven to provide a huge improvement in chiller performance in hundreds of installs, especially on the hottest days with the highest loads, when you need the machine the most.

Innovas Literature

Download the "Improving Chiller Efficiency Through Automatic Tube Cleaning System Technology" white paper to see how sponge balls can energy efficiency by reducing fouling of shell and tube heat exchangers and read different case studies.

Innovas’s Website

Visit Innovas for more information on all of their products.
Visit Innovas