Swegon

Chilled Beams and Air Induction Units For Precise Temperature Control

Precise Temperature Control For Quiet Environments

Swegon offers precise cooling, heating, and ventilation through noiseless air induction units and chilled beams that enhance occupants' comfort in energy-conscious buildings.

The Price You Pay For Fan-coil Units

Occupant discomfort requires precise temperature and noise control of each space. Sometimes this comes at an expensive price: higher energy consumption and maintenance costs.

Fan-coil units may offer a lower initial investment, but they also come with many setbacks: higher noise level, condensation on the heat exchanger, electrical connections and wiring controls, and higher maintenance requirements.

In addition, fan-coil units usually work only with recycled air or with a small fresh air quantity, requiring an additional air mixing box in front of the unit. Air direction is set towards the comfort area, without the Coanda effect, and the air temperature is either too low or too high, creating an unpleasant environment.

Induction units are devices that utilize nozzles instead of a fan to move air. They offer three functions in one device: cooling, heating, and ventilation. Outdoor prepared air is supplied through noiseless nozzles forming the Coanda effect, with no draft, and with neutral air temperature in the comfort area.

 

The Price You Pay For Fan-coil Units

Occupant discomfort requires precise temperature and noise control of each space. Sometimes this comes at an expensive price: higher energy consumption and maintenance costs.

Fan-coil units may offer a lower initial investment, but they also come with many setbacks: higher noise level, condensation on the heat exchanger, electrical connections and wiring controls, and higher maintenance requirements.

In addition, fan-coil units usually work only with recycled air or with a small fresh air quantity, requiring an additional air mixing box in front of the unit. Air direction is set towards the comfort area, without the Coanda effect, and the air temperature is either too low or too high, creating an unpleasant environment.

Induction units are devices that utilize nozzles instead of a fan to move air. They offer three functions in one device: cooling, heating, and ventilation. Outdoor prepared air is supplied through noiseless nozzles forming the Coanda effect, with no draft, and with neutral air temperature in the comfort area.

 

More Comfort With Less Energy and Noise

Swegon is the industry leader in new and innovative technology for chilled beams and induction comfort modules.

With Swegon, fresh air quantity is usually doubled when compared to the minimum requested by design, creating a healthy and very pleasant environment.

During summer, the supplied water temperature for the unit heat exchanger doesn’t allow condensation, and no condensation means no condensate drain, no condensate pump, no condensate network, and no bad smell.

Because Swegon doesn’t operate with fans, energy consumption and noise levels are very low, and the need for a filter to be installed local to the terminal unit is eliminated.

Swegon’s comfort modules are complemented by ultra-compact, low sound, high-efficiency DOAS units with available energy recovery options that payback even in moderate climates.

In fact, Swegon solutions can result in an estimated 1 or 2 more points from LEED EAc1 in comparison to a fan coil unit system, and their life is 3 to 4 times longer.

More Comfort With Less Energy and Noise

Swegon is the industry leader in new and innovative technology for chilled beams and induction comfort modules.

With Swegon, fresh air quantity is usually doubled when compared to the minimum requested by design, creating a healthy and very pleasant environment.

During summer, the supplied water temperature for the unit heat exchanger doesn’t allow condensation, and no condensation means no condensate drain, no condensate pump, no condensate network, and no bad smell.

Because Swegon doesn’t operate with fans, energy consumption and noise levels are very low, and the need for a filter to be installed local to the terminal unit is eliminated.

Swegon’s comfort modules are complemented by ultra-compact, low sound, high-efficiency DOAS units with available energy recovery options that payback even in moderate climates.

In fact, Swegon solutions can result in an estimated 1 or 2 more points from LEED EAc1 in comparison to a fan coil unit system, and their life is 3 to 4 times longer.

Product Highlights

High occupant's comfort

Big energy savings

Low sound operation

No condensation on heat exchanger

Low space requirements, compact air handling units

Savings on building height

Savings on ductwork

Swegon Case Study

Download the Swegon case study to see how the CRC Winn Center, in Sacramento, was able to balance energy consumption with optimized human comfort.